11
Installation
Step 16
Illustration
STEP 16.
To ensure the gate opens to precisely 90°, the Adjustable Clevis needs to be set.
a. Loosen
3
/
8
” hex bolts and
nylock nuts in
Adjustable Clevis.
b. Tip gate vertically to 90° and re-tighten
3
/
8
” hex
bolts and nuts.
Step 15
Illustration
INSTALLATION IS COMPLETE!
A
DETAIL A
Final operational location
STEP 14.
Fully extend assembly upward, anchor Gate Post back onto the floor surface, and tip gate down into Gate
Catch. As the gate approaches fully closed, you should hear a loud noise of the dampener self-setting.
STEP 15.
Visually verify that the dampener self-set into the appropriate location.
a. Insert
3
/
8
” x 2
1
/
4
” hex bolt and tighten
3
/
8
” nylock nut.
DANGER
Keep fingers clear of dampener pivot points, dampener is under high pressure.
8
9.3
9.6
9.13
NOTICE
If preferred, remove colored circle decals once
gate is assembled.
© CAI Safety Systems | (951) 465-7386 | https://caisafety.com | [email protected]
