Cag purification LTE3 HGV, Installation, Operation, Maintenance And Parts Manual

Page: 3 / 38

GB
Dear Customer,
thank you for choosing our product. In order to get the best performance from this product, please read this
manual carefully. To avoid incorrect operation of the equipment and possible physical risk to the operator,
please read and strictly follow the instructions contained in this manual. Note, these instructions are in
addition to the safety rules that apply in the country where the dryer is installed.
This manual refers to refrigerated air dryers model LTE3, LTE 5 and LTE8 air cooled, fitted with DMC6 Air
Dryer Controller.
Before packing for shipment each
LTE series refrigerated air dryer is subjected to a rigorous test to ensure
the absence of any manufacturing faults and to demonstrate that the device can perform all the functions
for which it has been designed.
Once the dryer has been properly installed according to the instructions in this manual, it will be ready for
use without any further adjustment.
The operation is fully automatic, and the maintenance is limited to few controls and some cleaning
operations, as detailed in the following chapters.
This manual must be maintained available in any moment for future references and it has to be
intended as inherent part of the relevant dryer.
Due to the continuous technical evolution, we reserve the right to introduce any necessary change without
giving previous notice.
Should you experience any trouble, or for further information, please do not hesitate to contact us.
IDENTIFICATION PLATE
Model
Serial No.
Code
Nominal Flow Rate
Max Air Pressure
Max Inlet Air Temp.
Ambient temp.
Refrigerant
Refrig. Design Pres. HP/LP
Electric Supply
Electric Nominal Power
Fuse Max.
Manufactured
The product identification plate,
on the back of the dryer, shows
all the primary data of the
machine.
Upon installation, fill in the table
copying the data shown on the
identification plate. This data
must always be provided to the
manufacturer or to the dealer
when information or spares are
needed, even during the
warranty period.
The removal or the alteration of
the identification plate will void
the warranty rights.
Model
Serial No.
Code
Max Air Pressure
Max Inlet Air Temp.
Ambient Temp.
Refrigerant
Refrig. Design Pres.
HP/LP
Electric Supply
Electric Nominal Power
Fuse Max.
Manufactured
psig
°F
°F
type/oz
psig
V/ph/Hz
W/A
A
Nominal Flow Rate
scfm
WARRANTY CONDITIONS
For 12 months from the installation date, but no longer than 14 months from the delivery date, the warranty
covers faulty parts, which will be repaired or replaced free of charge, except the travel, hotel and restaurant
expenses of our technician.
The warranty doesn’t cover any responsibility for direct or indirect damages to persons, animals or
equipment caused by improper usage or maintenance, and it’s limited to manufacturing faults only.
The right to warranty repairs is subordinated to the strict compliance with the installation, use and
maintenance instructions contained in this manual.
The warranty will be immediately voided in case of even small changes or alterations to the dryer.
To initiate repairs during the warranty period, the data reported on the identification plate must be provided.