Caen RFID skID, Technical Information Manual

Page: 80 / 105

HID PROFILE - skID Technical Information Manual 80
Windows PCs
BT Communication Setup
Warning: By default the reader is in the easy2read profile and the BLE is activated.

If your reader is in the EASY2READ profile active, in order to set the HID profile, please
refer to § Profile paragraph page 36.

If your reader is in the USB communication interface active, follow the instructions given
in paragraph § Bluetooth and USB communication page 42 to select the Bluetooth
communication interface using the skID R1280I Configuration Tool and then the
instructions in chapter §
BT-BLE switching page 89 to switch the reader from BLE
(Bluetooth Low Energy) to BT (Bluetooth Classic).

If your reader is in the BLE communication interface active, follow the instructions in
chapter § BT-BLE switching page 89 to switch the reader from BLE (Bluetooth Low Energy)
to BT (Bluetooth Classic).
Follow the steps below to connect your Windows PC to the skID reader using the BT connection. All the
images below were generated using the Windows 10 Operating System.
1. In your Windows Pc go to Settings

Devices .
2. Click on Bluetooth & other devices

Add Bluetooth or other device :
1. Click on Bluetooth :