ION EXTERNAL INTERFACES DESCRIPTION
- Ion Technical Information Manual
12
In the following picture the drawing of KPPX-3P is shown.
Fig. 3.2: Ion R4301P Plug Cable Connector
A standard power supply AC/DC adapter 24Vdc output voltage (mod.
WALIM0000003
) for the Ion R4301P reader is
available for purchase (see §
Ordering Options
page 9).
Ethernet port
The Ethernet interface of Ion R4301P can be used to connect the reader to a 10/100/1000BaseT network using a RJ45
cable.
The pinout of the connector in shown in the following table:
Pin #
Signal
Description
1
DA+
Bi-directional pair A +
2
DA-
Bi-directional pair A -
3
DB+
Bi-directional pair B +
4
DC+
Bi-directional pair C +
5
DC-
Bi-directional pair C -
6
DB-
Bi-directional pair B -
7
DD+
Bi-directional pair D +
8
DD-
Bi-directional pair D -
Tab. 3.2: Ion R4301P Ethernet Connector Pinout
Note
: the Ion R4301P does not support Power Over Ethernet (POE).
The Ethernet connector has two LEDs with the following functionalities:
LED
FUNCTION
TYPE
Right
Network activity
Blinking Yellow
Left
10Mbps connection
OFF
Left
100Mbps connection
Yellow
Left
1000Mbps connection
Green
Tab. 3.3: Ion R4301P Ethernet Connector LEDs Functionalities
