FAST-PS-1K5 – User’s Manual
40
3.
Local Control
This chapter describes the local control functionalities that are provided by the
FAST-PS-1K5 power supply and some useful information on how to use it.
The power supply can work either in LOCAL mode or in REMOTE mode. The
control mode (LOCAL or REMOTE) can be set on the configuration page of the local
display. Please note that only readbacks are allowed from the remote communication
interfaces when the unit is in LOCAL mode (i.e. settings are inhibited).
3.1
Navigation Switch
Each FAST-PS power supply module is equipped with a Navigation Switch on
the front panel of the unit as shown in the following
Figure 27
:
Figure 27:
Navigation switch
There are multiple actions that can be performed via this front navigation
switch:
Left, Right, Up, Down arrow pushbuttons;
Internal encoder rotation (CW and CCW);
Central pushbutton (it will also be referred to as “Enter”).
