CAE Juno, User Manual, Page: 48 / 101

Setup
42 ©2023 CAE 905K600152 v1.4
CAE Juno
Step 7: Place Juno’s Wig
1. Remove the wig from the packaging, and remove all packing materials.
2. Place the wig on Juno’s head. If the wig needs to be adjusted, follow the steps in “Adjust
the Fit of the Wig” below.
Placing the Wig
Adjust the Fit of the Wig
1. Remove the wig from Juno.
2. Turn the wig hair side down.
3. Locate the adjustment strip.
4. Locate the adjustment hooks towards both ends of the adjustment strip.
5. Use the adjustment hooks to pull the wig tighter by inserting them into loops closer to the
center.
6. Loosen the wig by moving the adjustment hooks to loops further from the center.
Tightening the Wig Loosening the Wig