CB-MAN-64
Operator's Manual - Boom 64M, 72M, 76M
Page 6 of 74
Cadman Power Equipment Limited ▪ BOX 100, Courtland, Ontario, Canada N0J-1E0 ▪ Phone: 519-688-2222 ▪ Fax: 519-688-2100 ▪ www.cadmanpower.com
Safety Precautions
Please take the time to read and understand this manual to avoid errors and
unnecessary risks. If you have any questions or concerns, please contact
CADMAN POWER
EQUIPMENT LIMITED
or your local dealer/distributor.
FAILURE TO FOLLOW ALL SAFETY INSTRUCTIONS CAN RESULT IN DEATH OR
SERIOUS INJURY FOR YOU AND/OR ANY SPECTATORS.
DO NOT
move or operate this machine until you have read and understand these
instructions in this manual.
NEVER
allow untrained persons to operate this machine.
DO NOT
perform service this machine while it is in operation.
MAKE SURE
all mechanical and hydraulic tension has been released before
attempting any service on the machine.
CHECK
all fasteners (nuts and bolts) regularly for tightness.
PERFORM REQUIRED MAINTENANCE
as prescribed or as necessary to keep this
machine in safe operating condition.
KEEP ALL SPECTATORS
at a safe distance.
STAY CLEAR
of high pressure supply lines, especially when first pressurizing the
system.
DO NOT
remove or alter any shielding on this machine.
KEEP CLEAR
of all moving parts.
NEVER
tow this machine at speeds greater than
6 mph [10 km/h]
and be certain
the tow vehicle has adequate braking capacity to maintain safe control at all times.
NEVER
tow this machine with the boom loaded with fluid.
BE AWARE
of any obstacles (i.e. mail boxes, fence posts, and other equipment)
that you may encounter when transporting the machine.
REGULAR INSPECTION
of your boom couplings, tubing and gaskets should be a
part of your regular set-up routine. Any defective parts
MUST
be replaced or
repaired before the machine is put into service.
This symbol, the safety-alert symbol, indicates a hazard. When you come
across the safety-alert symbol in this manual, make sure you fully
understand and abide by the given instructions or warnings.
