TR-MAN-6003
3-POINT HITCH HOSE CADDY
Page 22 of 24
Required Maintenance
Prevention of mechanical failure is the goal of any good maintenance schedule. The
secret to preventing unwanted down time is to adhere to a maintenance schedule
suited to the way you use the equipment. Your maintenance schedule should include
the following minimum requirements:
Maintenance must be done ONLY when the machine is on level ground
and disconnected from the tractors hydraulics and 3-point hitch.
Each Use
Maintenance Item
Figure
Procedure
Visually inspect
equipment
N / A
Walk around the unit and inspect for loose,
missing or damaged items. Replace missing or
damaged items and tighten loosened items.
Adjust, if necessary,
the alignment and
tension of the drive
chain
Figure 6
The drive chain (around the drum) is properly
tensioned when it has no visible slack and is
seating properly onto the drive pegs when the
drum rotates. Adjustments are made by turning
the locknut (3/4” wrench) on the spring
adjustment rod.
Lubricate all grease
fittings
Figure 7
Using a grease gun, lubricate each grease fitting
with an appropriate amount of acceptable
grease (see “Lubricants”)
Table 1 - Required Maintenance - Each Use
Figure 6 - Chain Tension Adjuster
img-00165.png
TR-MAN-6003
3-POINT HITCH HOSE CADDY
Page 3 of 24
3-Point Hitch Hose Caddy
We would like to thank you for purchasing your new
Cadman 3-Point Hitch Hose
Caddy
. You have purchased a product of superior quality that will serve your needs for
a long time provided you follow this manual and safety procedures.
Figure 1 – Cadman 3-Point Hitch Hose Caddy
img-00168.png
BEFORE
operating your new
Cadman 3-Point Hitch Hose Caddy
, inspect the
machine for any damage or parts which may have come loose during shipping.
REPORT ANY DAMAGE TO CADMAN POWER EQUIPMENT LIMITED OR YOUR
LOCAL DEALER IMMEDIATELY!
Summary of Contents for 6003
Page 2: ......
