20/23 www.cadis.be [email protected]
User’s Manual
Aquavision Control
Monitoring Module
The user can use unlimited amounts of water for a restricted period. This can be activated via the module touch
screen or remotely via his computer.
In the Real Time screen in the main menu select the "User action" button.
This takes you to a screen where you see the name of the pipe. In the column "Unlimited water consumption" press
on the "Active" button to activate unlimited water consumption.
This period of unlimited water consumption is restricted to 24 hours. The remaining time is also shown on the Real
time screen. As soon as this period of unlimited water consumption expires, the module will switch back again to
the normal protection mode.
Press the "Stop Unlimited water consumption" button to return to normal operation.
3.
ModBus communication
This information is only intended for persons who set up and program the GBS systems.
The following data can be read by a GBS system by means of a ModBus TCP/IP communication protocol on the
standard IP port 502. Modbus RTU via RS485 can be used on slave address 1. This is fixed and cannot be changed. If
the communication takes place via Modbus RTU, the slave address is always 1.
( Baudrate = 19200 / Parity = None /
Bytesize = 8 / Stopbits = 1)
Register 30001
Street side water meter Total Low Word
Register 30002
Street side water meter Total High Word
Register 30003
Street side water meter Current flow Low word
Register 30004
Street side water meter Current flow High word
Register 30007
Official Water meter Total Low Word
Register 30008
Official Water meter Total High Word
Register 30009
Official Current flow water meter Low word
Register 30010
Official Current flow water meter High word
Register 30013
Sub Water meter 1 Total Low Word
Register 30014
Sub Water meter 1 Total High Word
Register 30015
Sub water meter 1 Current flow Low word
Register 30016
Sub water meter 1 Current flow High word
