10/23 www.cadis.be [email protected]
User’s Manual
Aquavision Control
Monitoring Module
2.4.
Modifying the password and user language
Go to the Device settings:
The user password can be changed here. Note it down and check it first and click on save to change it. Now you can
only log in using your new password. 'User' is then no longer valid.
On this page the user language and the name + the place of the module can be set or modified.
2.5.
Alarm when daily or weekly consumption is exceeded
Go to the Device settings (same screen as above)
On the Device settings page a percentage can be entered in excess of the average day usage. The module will send
an alarm or cut off the water supply if the consumption in a day is higher than the average consu this
percentage. The same can be done per week. The type of alarm (alarm e-mail or water supply cut-off) is set on the
Alarm configuration page (see later).
