Cadillac XT6 Owner'S Manual Download Page 91

Page: 91 / 385

Cadillac XT6 Owner Manual (GMNA-Localizing-MidEast-14574703) - 2021 -

CRC - 7/15/20

STORAGE

The cargo cover is used to cover items
in the cargo area. It is foldable and
stores in the cargo storage bin under
the load floor when not in use.

Installing the Cargo Cover

1. Slide the seat belt into the clip on

the side of the vehicle Do this for
both sides.

2. Remove the cargo cover from the

storage bag.

3. Unroll the cargo cover.
4. Hold the cargo cover with the lock

buttons facing up and the longest
crossbar facing the front of the
vehicle.

5. Open both crossbars until the

center hinge locks. Keep fingers
clear of the crossbar hinges to
avoid being pinched.

Summary of Contents for XT6


































































































































































































































































































































































































Search results

Summary of Contents for XT6

Reviews:

Related manuals for XT6

Brands by name

Popular brands

Cadillac XT6, Owner'S Manual

Search results

Summary of Contents for XT6

Reviews:

Related manuals for XT6

Brands by name

Popular brands