Home
/
Cadillac
/
XT6
/
Owner'S Manual

Cadillac XT6, Owner'S Manual

Share

Page: 224 / 385

Cadillac XT6 Owner'S Manual Download Page 224

Cadillac XT6 Owner Manual (GMNA-Localizing-MidEast-14574703) - 2021 -

CRC - 7/15/20

224

DRIVING AND OPERATING

{

Warning

Shifting into a drive gear while the
engine is running at high speed is
dangerous. Unless your foot is
firmly on the brake pedal, the
vehicle could move very rapidly.
You could lose control and hit
people or objects. Do not shift into
a drive gear while the engine is
running at high speed.

Caution

Shifting out of P (Park) or
N (Neutral) with the engine running
at high speed may damage the
transmission. The repairs would not
be covered by the vehicle warranty.
Be sure the engine is not running at
high speed when shifting the
vehicle.

The vehicle is not designed to stay in
N (Neutral) for more than
five minutes. It may automatically
shift into P (Park). N (Neutral) is not

intended for towing. If the vehicle
needs to be towed, see

.

To shift into N (Neutral):

1. Move the shift lever forward to the

first detent from the center
position.

.

If the vehicle is in P (Park),
apply the brake pedal and press
the shift lock release button
while moving the shift lever
forward.

.

N will illuminate in red.

2. After releasing the shift lever, it

will return to the center position.

To shift out of N (Neutral):

1. Bring the vehicle to a

complete stop.

2. Shift to the desired gear. If shifting

from N (Neutral) to R (Reverse),
press the shift lock release button.

3. After releasing the shift lever, it

will return to the center position.

Car Wash Mode

This vehicle includes a Car Wash
Mode that allows the vehicle to
remain in N (Neutral) for use in
automatic car washes.

Car Wash Mode (Engine Off

–

Driver

in Vehicle)

To place the vehicle in N (Neutral)
with the engine off and the vehicle
occupied:

1. Drive to the entrance of the

car wash.

2. Apply the brake pedal.
3. Shift to N (Neutral).
4. Turn off the engine and release the

brake pedal.

5. The indicator should continue to

show N. If it does not, repeat
Steps 2

–

4.

6. The vehicle is now ready for the

car wash.

Car Wash Mode (Engine Off

–

Driver

out of Vehicle)

To place the vehicle in N (Neutral)
with the engine off and the vehicle
unoccupied:

«
...
222
223
224
225
226
...
»

Summary of Contents for XT6


































































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands