Cadillac XT6 Owner'S Manual Download Page 93

Page: 93 / 385

Cadillac XT6 Owner Manual (GMNA-Localizing-MidEast-14574703) - 2021 -

CRC - 7/15/20

STORAGE

8. Place the cargo cover in the

storage bin.

9. After storing the cargo cover, make

sure to properly secure the load
floor.

10. Remove the seat belt from the clips

on both sides.

Cargo Tie-Downs

The vehicle has four cargo tie-downs
in the rear compartment.

Cargo Management
System

Caution

To avoid vehicle damage, do not
open the load floor more than
90 degrees.

Lift the load floor to access the cargo
management system storage area.

Cargo Management System Tray
Removal

To access the spare tire, the cargo
management system tray must be
removed.

Summary of Contents for XT6


































































































































































































































































































































































































Search results

Summary of Contents for XT6

Reviews:

Related manuals for XT6

Brands by name

Popular brands

Cadillac XT6, Owner'S Manual

Search results

Summary of Contents for XT6

Reviews:

Related manuals for XT6

Brands by name

Popular brands