manualshive.com logo in svg

Cadillac SRX 2016, Owner'S Manual

The Cadillac SRX 2016 Owner's Manual is an essential companion for every SRX owner. With our user-friendly website, you can easily and freely download this comprehensive manual, providing you with all the necessary information to maximize your driving experience. Don't miss the opportunity to access it at manualshive.com.

Share
Download
background image

Cadillac SRX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9087647) - 2016 - crc - 5/4/15

Seats and Restraints

77

2. Remove the child restraint from

the vehicle.

3. Remove any additional items

from the seat such as blankets,
cushions, seat covers, seat
heaters, or seat massagers.

4. Reinstall the child restraint

following the directions
provided by the child restraint
manufacturer and refer to

Securing Child Restraints
(Rear Seat)

0

94

or

Securing

Child Restraints (Front
Passenger Seat)

0

96

.

5. If, after reinstalling the child

restraint and restarting the
vehicle, the on indicator is still
lit, turn the vehicle off. Then
slightly recline the vehicle
seatback and adjust the seat
cushion, if adjustable, to make
sure that the vehicle seatback
is not pushing the child
restraint into the seat cushion.

Also make sure the child
restraint is not trapped under
the vehicle head restraint.

If this happens, adjust the head
restraint. See

Head Restraints

0

52

.

6. Restart the vehicle.

The passenger sensing system may
or may not turn off the airbags for a
child in a child restraint depending
upon the child's size. It is better to
secure a child restraint in a
rear seat.

If the Off Indicator Is Lit for an
Adult-Sized Occupant

If a person of adult size is sitting in
the front outboard passenger seat,
but the off indicator is lit, it could be

because that person is not sitting
properly in the seat. Use the
following steps to allow the system
to detect that person and enable the
front outboard passenger frontal
airbag:

1. Turn the vehicle off.

2. Remove any additional material

from the seat, such as
blankets, cushions, seat
covers, seat heaters, or seat
massagers. Also remove
laptops or other electronic
devices.

3. Place the seatback in the fully

upright position.

4. Have the person sit upright in

the seat, centered on the seat
cushion, with legs comfortably
extended.

5. Restart the vehicle and have

the person remain in this
position for two to
three minutes after the on
indicator is lit.

Summary of Contents for SRX 2016































































































































































































































































































































































































Reviews:

No comments

Related manuals for SRX 2016

Falcon 1990 Installation Instructions And Specifications preview
1990
Brand: Falcon Pages: 8
Porsche 911 GT3R 2010 Technical Manual preview
911 GT3R 2010
Brand: Porsche Pages: 144
Warrior Products 4560 Manual preview
4560
Brand: Warrior Products Pages: 4
Audiovox Prestige APS-45B Installation Manual preview
Prestige APS-45B
Brand: Audiovox Pages: 8
Volvo 1985 740 GL Owner'S Manual preview
1985 740 GL
Brand: Volvo Pages: 138
Raytel LLC TellPhone 4200 Installation Instructions & Operating Manual preview
TellPhone 4200
Brand: Raytel LLC Pages: 40
U.S. General 95904 Operating Instructions preview
95904
Brand: U.S. General Pages: 4
ULTIMATE SPEED 94600 Assembly And Safety Advice preview
94600
Brand: ULTIMATE SPEED Pages: 21
Hella AREIA 7040 Installation Instructions Manual preview
AREIA 7040
Brand: Hella Pages: 21
Scion 2012 iQ Quick Reference Manual preview
2012 iQ
Brand: Scion Pages: 24
Westin 31-0190 Installation Instructions preview
31-0190
Brand: Westin Pages: 2
Acura 08L07-TA1-203 Installation Instructions Manual preview
08L07-TA1-203
Brand: Acura Pages: 6
SSV Works RG4-DM3 Manual preview
RG4-DM3
Brand: SSV Works Pages: 2
Autoplugin RCP-B1 Installation Manual preview
RCP-B1
Brand: Autoplugin Pages: 8
Menabo FROZEN ALU Fitting Instructions preview
FROZEN ALU
Brand: Menabo Pages: 4
Saab 2007 9-7X Owner'S Manual preview
2007 9-7X
Brand: Saab Pages: 498
MBW i Wallbox Plus Owner'S Manual preview
i Wallbox Plus
Brand: MBW Pages: 40
EZ-ON 100SMU Quick Start Manual preview
100SMU
Brand: EZ-ON Pages: 2

Brands by name

Popular brands

Load more brands