Cadillac SRX 2016 Owner'S Manual Download Page 308

Page: 308 / 382

Cadillac SRX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9087647) - 2016 - crc - 5/4/15

Vehicle Care

307

Cargo Management System

104

for instructions on how to access
the tire sealant and compressor kit.

Tire Changing

Removing the Spare Tire and
Tools

1. Extension
2. Jack
3. Wheel Wrench
4. Wing Nut

To access the spare tire and tools:

1. Open the liftgate. See

Liftgate

2. Press on the bottom of the

handle assembly to unlatch it
and lift up on the handle.

The prop rod locks into place
when open.

3. Remove the spare tire cover.

4. Remove the rubber cover.

Summary of Contents for SRX 2016































































































































































































































































































































































































Search results

Summary of Contents for SRX 2016

Reviews:

Related manuals for SRX 2016

Brands by name

Popular brands

Cadillac SRX 2016, Owner'S Manual

Search results

Summary of Contents for SRX 2016

Reviews:

Related manuals for SRX 2016

Brands by name

Popular brands