manualshive.com logo in svg

Cadillac BLS, Owner'S Manual

The Cadillac BLS Owner's Manual is a comprehensive guide for owners of this exquisite luxury sedan. Easily accessible for free download on manualshive.com, this manual provides detailed instructions and essential information on maintenance, features, and troubleshooting. Get the most out of your Cadillac BLS with this indispensable manual.

Share
Download
background image

74

Instruments and controls

Speed warning
This value is preset to 55 mph (90 km/h). 
The value can be set to between 
0 and 150 mph (0–250 km/h).
On some markets, the value is locked 
at 120 km/h and cannot be changed.

1 Select SPD W using the steering wheel 

buttons,  

or .

2 Hold the SET button depressed until 

a chime sounds.

3 Select speed using the steering wheel 

buttons,  

or .

4 End by pressing the SET button.

The word ON on the right-hand side of the 
display indicates when the speed warning 
function is active.
An audible alarm will sound if the set speed 
is exceeded.
Disengage the function with the CLR button. 
Re-engage the function using the SET 
button.

Calculating the arrival time
(When will I arrive if I know how far I have to 
drive?)
This function should be used before starting 
out a journey.
To calculate the arrival time, the distance 
must first be given.

1 Select Dist using the steering wheel 

buttons,  

or .

2 Hold the SET button depressed until a 

chime sounds.

1 Set how long it takes to get to the desti-

nation using the steering wheel buttons, 

 or 

.

2 End by pressing the SET button.

The estimated arrival time is displayed on 
the right-hand side of the display.
If you take a break, this time is added to the 
estimated arrival time.
During the trip, you can select Dist to dis-
play the estimated arrival time as well as 
how much longer you have to drive.
After the distance to destination has 
decreased to zero, Dist will function as a trip 
meter (seeUsing DIST as a trip meter). The 
starting value for the trip meter will be the 
last distance set for the Dist function.
Example: The Dist function is set to 100 km. 
After the count-down has reached 0 km, 
Dist will act as a trip meter beginning 
at 100 km.

Calculating the arrival time if a specified 
average speed is maintained
(When will I arrive if I know how far I have 
to drive and know what my average speed 
will be?)
This function should be used before starting 
out a journey.
First, set the distance under Dist.

1 Then select the Speed Ø function using 

the steering wheel buttons, 

 or 

.

2 Hold the SET button depressed until a 

chime sounds.

3 Set an estimated average speed using 

the steering wheel buttons, 

 or 

.

4 End by pressing the SET button.

The time of arrival is updated during the 
journey based on the average speed since 
Dist was set. The speed of the car must 
exceed 12 mph (20 km/h).
By selecting Dist during the journey, you 
can see how far is left.
When Dist reaches zero Dist acts as a trip 
meter. The trip meter starts from the dis-
tance that was set previously.

460_OM_MY09.book  Page 74  Wednesday, April 2, 2008  10:32 AM

Summary of Contents for BLS

















































































































































































































































































Reviews:

No comments

Related manuals for BLS

Calira 811 Manual preview
811
Brand: Calira Pages: 14
RaceChip Pro 2 Installation Manual preview
Pro 2
Brand: RaceChip Pages: 12
DAVIS 8126GD User Manual preview
8126GD
Brand: DAVIS Pages: 32
Thule CIRCUIT 526XT Manual preview
CIRCUIT 526XT
Brand: Thule Pages: 12
Q Mobility Group Q Access Alpha GSE 2023 Installation Manual preview
Q Access Alpha GSE 2023
Brand: Q Mobility Group Pages: 9
Thule Kit 1429 Fitting Instructions Manual preview
Kit 1429
Brand: Thule Pages: 8
Fast Master Products SWIVELWHEEL-46 Assembly Instructions Manual preview
SWIVELWHEEL-46
Brand: Fast Master Products Pages: 13
Anker Technology Roav VIVA Owner'S Manual preview
Roav VIVA
Brand: Anker Technology Pages: 8
Pontiac 2006 Relay Getting To Know Manual preview
2006 Relay
Brand: Pontiac Pages: 20
BMW M3 SEDAN Owner'S Manual preview
M3 SEDAN
Brand: BMW Pages: 392
Curt Manufacturing 13434 Installation Instructions preview
13434
Brand: Curt Manufacturing Pages: 4
Toyota 2012 Sienna Owner'S Manual preview
2012 Sienna
Brand: Toyota Pages: 779
Brink 5978 Fitting Instructions Manual preview
5978
Brand: Brink Pages: 21
AllTrade Powerbuilt 648601 Operating Instructions preview
Powerbuilt 648601
Brand: AllTrade Pages: 3
Perrycraft SportQuest Series Installation preview
SportQuest Series
Brand: Perrycraft Pages: 2
OCAM SS2-RANGER-12 Fitting Instruction preview
SS2-RANGER-12
Brand: OCAM Pages: 4
Waeco MagicComfort MSH50 Installation And Operating Instructions Manual preview
MagicComfort MSH50
Brand: Waeco Pages: 104
Honda 2013 Civic CNG Owner'S Manual preview
2013 Civic CNG
Brand: Honda Pages: 41

Brands by name

Popular brands

Load more brands