manualshive.com logo in svg

Cadillac 2015 SRX, Owner'S Manual

The Cadillac 2015 SRX Convenience/Personalization Manual is a comprehensive guide that allows users to customize their driving experience. This essential manual is available for download free of charge from manualshive.com, providing users with easy access to the information they need to maximize the features of this luxury vehicle.

Share
Download
background image

Black plate (17,1)

Cadillac SRX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7707476) - 2015 - crc - 4/8/14

Vehicle Care

10-17

Then check to see if the engine
cooling fans are running. If the
engine is overheating, both fans
should be running. If they are not,
do not continue to run the engine
and have the vehicle serviced.

{

Caution

Running the engine without
coolant may cause damage or a
fire. Vehicle damage would not be
covered by the vehicle warranty.

If Steam Is Coming from the
Engine Compartment

{

Warning

Steam from an overheated engine
can burn you badly, even if you
just open the hood. Stay away
from the engine if you see or hear
steam coming from it. Just turn it
off and get everyone away from
the vehicle until it cools down.

(Continued)

Warning (Continued)

Wait until there is no sign of
steam or coolant before you open
the hood.

If you keep driving when the
engine is overheated, the liquids
in it can catch fire. You or others
could be badly burned. Stop the
engine if it overheats, and get out
of the vehicle until the engine
is cool.

If No Steam Is Coming from
the Engine Compartment

If an engine overheat warning is
displayed but no steam can be seen
or heard, the problem may not be
too serious. Sometimes the engine
can get a little too hot when the
vehicle:

.

Climbs a long hill on a hot day.

.

Stops after high-speed driving.

.

Idles for long periods in traffic.

.

Tows a trailer.

If the overheat warning displays with
no sign of steam:

1. Turn the air conditioning off.

2. Turn the heater on to the highest

temperature and to the highest
fan speed. Open the windows as
necessary.

3. When it is safe to do so, pull off

the road, shift to P (Park) or
N (Neutral), and let the
engine idle.

If the temperature overheat gauge is
no longer in the overheat zone or an
overheat warning no longer
displays, the vehicle can be driven.
Continue to drive the vehicle slowly
for about 10 minutes. Keep a safe
vehicle distance from the vehicle in
front. If the warning does not come
back on, continue to drive normally
and have the cooling system
checked for proper fill and function.

If the warning continues, pull over,
stop, and park the vehicle
right away.

Summary of Contents for 2015 SRX


































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 SRX

PAC SWI-RC Installation Instructions preview
SWI-RC
Brand: PAC Pages: 4
PAC RP4-CH11 Manual preview
RP4-CH11
Brand: PAC Pages: 4
PAC BCI-CH41 User Manual preview
BCI-CH41
Brand: PAC Pages: 8
PAC C2R-CHY4 Installation Instructions preview
C2R-CHY4
Brand: PAC Pages: 5
Parrot CK 3000 Evolution Specifications preview
CK 3000 Evolution
Brand: Parrot Pages: 2
Toyota YARIS LIFTBACK 2009 Quick Reference Manual preview
YARIS LIFTBACK 2009
Brand: Toyota Pages: 13
Westfalia 316 145 Manual preview
316 145
Brand: Westfalia Pages: 71
Fiat 500 L 2019 User Manual preview
500 L 2019
Brand: Fiat Pages: 172
Honda HondaLink Quick Start Manual preview
HondaLink
Brand: Honda Pages: 6
Honda 2011 Civic Sedan Vehicle Instruction Card preview
2011 Civic Sedan
Brand: Honda Pages: 5
Suzuki 990E0-54P56-000 Installers And Users Instructions preview
990E0-54P56-000
Brand: Suzuki Pages: 12
METRON PC05T User Manual preview
PC05T
Brand: METRON Pages: 4
Mitsubishi MIrage 2019 Owner'S Handbook Manual preview
MIrage 2019
Brand: Mitsubishi Pages: 19
Volvo 1989 780 Owner'S Manual preview
1989 780
Brand: Volvo Pages: 123
Prorack K374 Manual preview
K374
Brand: Prorack Pages: 14
TracRac TracONE Installation Instructions Manual preview
TracONE
Brand: TracRac Pages: 8
Griffin Technology iTrip Bluetooth User Manual preview
iTrip Bluetooth
Brand: Griffin Technology Pages: 6
Mitsubishi Pajero Pinin 1999 Workshop Manual preview
Pajero Pinin 1999
Brand: Mitsubishi Pages: 919

Brands by name

Popular brands

Load more brands