manualshive.com logo in svg

Cadillac 2015 SRX, Owner'S Manual

The Cadillac 2015 SRX Convenience/Personalization Manual is a comprehensive guide that allows users to customize their driving experience. This essential manual is available for download free of charge from manualshive.com, providing users with easy access to the information they need to maximize the features of this luxury vehicle.

Share
Download
background image

Black plate (70,1)

Cadillac SRX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7707476) - 2015 - crc - 4/8/14

10-70

Vehicle Care

3. Place the kit on the ground.

Make sure the tire valve stem is
positioned close to the ground
so the hose will reach it.

4. Remove the tire valve stem cap

from the flat tire by turning it
counterclockwise.

5. Attach the air only hose (7) onto

the tire valve stem by turning it
clockwise until it is tight.

6. Plug the power plug (8) into the

accessory power outlet in the
vehicle. Unplug all items from
other accessory power outlets.
See

Power Outlets on page 5-6

.

If the vehicle has an accessory
power outlet, do not use the
cigarette lighter.

If the vehicle only has a cigarette
lighter, use the cigarette lighter.

Do not pinch the power plug
cord in the door or window.

7. Start the vehicle. The vehicle

must be running while using the
air compressor.

8. Press and turn the selector

switch (1) clockwise to the Air
Only position.

9. Press the on/off button (2) to

turn the compressor on.

The compressor will inflate the
tire with air only.

10. Inflate the tire to the

recommended inflation
pressure using the pressure
gauge (3). The recommended
inflation pressure can be found
on the Tire and Loading
Information label. See

Tire

Pressure on page 10-48

.

The pressure gauge (3) may
read higher than the actual tire
pressure while the compressor
is on. Turn the compressor off
to get an accurate reading. The
compressor may be turned on/
off until the correct pressure is
reached.

If you inflate the tire higher
than the recommended
pressure you can adjust the

excess pressure by pressing
the pressure deflation
button (4) until the proper
pressure reading is reached.
This option is only functional
when using the air only
hose (7).

11. Press the on/off button (2) to

turn the tire sealant and
compressor kit off.

Be careful while handling the
tire sealant and compressor kit
as it could be warm after
usage.

12. Unplug the power plug (8) from

the accessory power outlet in
the vehicle.

13. Disconnect the air only hose

(7) from the tire valve stem, by
turning it counterclockwise, and
replace the tire valve stem cap.

14. Replace the air only hose (7)

and the power plug (8) and
cord back in its original
location.

Summary of Contents for 2015 SRX


































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 SRX

Fass Titanium Series Installation Manual preview
Titanium Series
Brand: Fass Pages: 13
Prorack K383 Fitting Instructions Manual preview
K383
Brand: Prorack Pages: 14
Audi Q3 2015 - 2019 Technical Service Bulletin preview
Q3 2015 - 2019
Brand: Audi Pages: 12
femkes Hopper on Top User Manual preview
Hopper on Top
Brand: femkes Pages: 7
CALIMA 46008 Operating Instructions Manual preview
46008
Brand: CALIMA Pages: 9
Parrot Parrot MKi + ParrotCK3100 range LOGAN Installation Manual preview
Parrot MKi + ParrotCK3100 range LOGAN
Brand: Parrot Pages: 10
NanoCam Plus NCP-MIRDVR522 User Manual preview
NCP-MIRDVR522
Brand: NanoCam Plus Pages: 32
Cadillac 54-6219 1954 Shop Manual preview
54-6219 1954
Brand: Cadillac Pages: 409
Fortin THAR-AUD1 Manual preview
THAR-AUD1
Brand: Fortin Pages: 9
Toyota Sienna 2021 Manual preview
Sienna 2021
Brand: Toyota Pages: 600
Draw tite 24963 Installation Instructions preview
24963
Brand: Draw tite Pages: 4
EFILive CM2350B User Manual preview
CM2350B
Brand: EFILive Pages: 25
Xpresskit DBALL2-HK7 Installation Manual preview
DBALL2-HK7
Brand: Xpresskit Pages: 18
Thule 1061-1-011 Fitting Instructions preview
1061-1-011
Brand: Thule Pages: 3
Saab 2000 9-5 2.3 Turbo Ecopower Owner'S Manual preview
2000 9-5 2.3 Turbo Ecopower
Brand: Saab Pages: 256
Roadefend RDT401P Instruction Book preview
RDT401P
Brand: Roadefend Pages: 15
Kargo Master PRO-IV Assembly Instructions Manual preview
PRO-IV
Brand: Kargo Master Pages: 8
Quadratec QuadraTop Adventure Top 1113.00 Series Installation Manual preview
QuadraTop Adventure Top 1113.00 Series
Brand: Quadratec Pages: 20

Brands by name

Popular brands

Load more brands