manualshive.com logo in svg

Cadillac 2015 SRX, Owner'S Manual

The Cadillac 2015 SRX Convenience/Personalization Manual is a comprehensive guide that allows users to customize their driving experience. This essential manual is available for download free of charge from manualshive.com, providing users with easy access to the information they need to maximize the features of this luxury vehicle.

Share
Download
background image

Black plate (30,1)

Cadillac SRX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7707476) - 2015 - crc - 4/8/14

10-30

Vehicle Care

4. Remove the two screws from the

taillamp assembly.

5. Pull the taillamp assembly

straight back to remove.

6. Turn the turn signal lamp bulb

socket counterclockwise to
remove it from the taillamp
assembly.

7. Pull the bulb straight out from

the socket.

8. Press a new bulb into the

socket, insert it into the taillamp
assembly, and turn the bulb
socket clockwise until it clicks.

9. Reinstall the taillamp assembly

and tighten the screws.

10. Reinstall the taillamp cover by

snapping it into place.

11. Push the push pin to secure

the taillamp cover.

Back-Up Lamps

To replace one of these bulbs:

1. Open the liftgate. See

Liftgate

on page 2-14

.

2. Remove the push pin (1) on the

taillamp cover (2).

3. Remove the taillamp cover from

the lamp assembly by pulling
rearward from the top to
unfasten from the snap tabs.

Summary of Contents for 2015 SRX


































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 SRX

AC Schnitzer F40 Fitting Instructions Manual preview
F40
Brand: AC Schnitzer Pages: 16
Quadratec QuadraTop Adventure Top S Installation Manual preview
QuadraTop Adventure Top S
Brand: Quadratec Pages: 20
Yakima SkyBox 12 Installation Instructions Manual preview
SkyBox 12
Brand: Yakima Pages: 6
Yakima HoldUp Plus2 Manual preview
HoldUp Plus2
Brand: Yakima Pages: 18
Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28 Install Instructions preview
1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28
Brand: Havis-Shields Pages: 3
hc-cargo 171850 Mounting And Operation Instructions preview
171850
Brand: hc-cargo Pages: 60
Sears 580.32601 Owner'S Manual preview
580.32601
Brand: Sears Pages: 41
PAC Stinger ELEV8 Install Manual preview
Stinger ELEV8
Brand: PAC Pages: 14
Kolpin 98310 Product Instructions preview
98310
Brand: Kolpin Pages: 3
aci ADARAC Aluminum M Series Installation Instructions Manual preview
ADARAC Aluminum M Series
Brand: aci Pages: 16
Imiola HAK-POL O/018 Quick Manual preview
O/018
Brand: Imiola HAK-POL Pages: 3
Volvo S90 2018 Quick Manual preview
S90 2018
Brand: Volvo Pages: 42
Tesla MODEL Y Owner'S Manual preview
MODEL Y
Brand: Tesla Pages: 274
Mercedes-Benz CLS 2015 Operator'S Manual preview
CLS 2015
Brand: Mercedes-Benz Pages: 398
Vauxhall Crossland X 2017 Owner'S Manual preview
Crossland X 2017
Brand: Vauxhall Pages: 245
Havis-Shields Telescoping Computer Base C-TCB-34 Install Instructions preview
Telescoping Computer Base C-TCB-34
Brand: Havis-Shields Pages: 1
PEUGEOT 106 2001 Owner'S Manual preview
106 2001
Brand: PEUGEOT Pages: 107
Dodge Charger SRT 392 2017 Operating Information Manual preview
Charger SRT 392 2017
Brand: Dodge Pages: 576

Brands by name

Popular brands

Load more brands