Cadillac 2015 SRX Owner'S Manual Download Page 20

Page: 20 / 417

Black plate (13,1)

Cadillac SRX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7707476) - 2015 - crc - 4/8/14

In Brief

1-13

HI:

Use for fast wipes.

LO:

Use for slow wipes.

INT:

Use for intermittent wipes. To

adjust wipe frequency, turn the

INT band up for more frequent
wipes or down for less frequent
wipes. If the vehicle has
Rainsense

™

, see

Windshield

Wiper/Washer on page 5-3

Windshield Wiper/Washer on
page 5-3

Turn the band up for more
sensitivity to moisture.

Turn the band down for less
sensitivity to moisture.

Move the windshield wiper lever
out of the INT position to
deactivate Rainsense.

OFF:

Use to turn the wipers off.

1X :

For a single wipe, briefly move

the wiper lever down. For several
wipes, hold the wiper lever down.

Windshield Washer

Pull the windshield wiper lever
toward you to spray windshield
washer fluid and activate the wipers.

Rear Window Wiper/Washer

The rear wiper controls are on the
end of the windshield wiper lever.

ON:

Press the upper portion of the

button for continuous rear window
wipes.

OFF:

The rear wiper turns off when

the button is returned to the middle
position.

INT:

Press the lower portion of the

button to set a delay between
wipes.

Push the windshield wiper

lever forward to spray washer fluid
on the rear window.

See

Windshield Wiper/Washer on

page 5-3

and

Rear Window Wiper/

Washer on page 5-4

Summary of Contents for 2015 SRX


































































































































































































































































































































































































































Search results

Summary of Contents for 2015 SRX

Reviews:

Related manuals for 2015 SRX

Brands by name

Popular brands

Cadillac 2015 SRX, Owner'S Manual

Search results

Summary of Contents for 2015 SRX

Reviews:

Related manuals for 2015 SRX

Brands by name

Popular brands