Cadillac 2008 Escalade EXT Owner'S Manual Download

Page: 424 / 496

3. Assemble the two jack handle extensions (I)

and wheel wrench (H) as shown.

4. Insert the open end

of the extension (F)
through the hole in
the rear bumper (G)
(hoist shaft
access hole).

5. Raise the tire part way upward. Make sure the

retainer is seated in the wheel opening.

6. Raise the tire fully against the underside of the

vehicle by turning the wheel wrench clockwise
until you hear two clicks or feel it skip twice.
You cannot overtighten the cable.

7. Make sure the tire is stored securely. Push, pull (A),

and then try to turn (B) the tire. If the tire moves,
use the wheel wrench to tighten the cable.

8. Reinstall the spare tire lock.

9. Close the hoist shaft access cover.

5-96

Summary of Contents for 2008 Escalade EXT

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Escalade EXT

Reviews:

Related manuals for 2008 Escalade EXT

Brands by name

Popular brands

Cadillac 2008 Escalade EXT, Owner'S Manual

Search results

Summary of Contents for 2008 Escalade EXT

Reviews:

Related manuals for 2008 Escalade EXT

Brands by name

Popular brands