Cadillac 2008 Escalade EXT Owner'S Manual Download Page 408

Page: 408 / 496

A. Wheel Blocks
B. Knob
C. Wing Nut
D. Retaining Hook

E. Jack
F. Jack Head
G. Mounting Bracket

2. Release the jack (E) from the mounting bracket (G)

by turning the knob (B) on the jack counterclockwise
to lower the jack head (F) from the mounting
bracket.

3. Remove the wheel blocks (A) attached to the jack (E)

by turning the wing nut (C) counterclockwise. Place
the wheel blocks where needed as indicated in
previously in this section.

The tools for changing a flat tire are located in the
passenger’s side top-box storage unit.

To remove the tools, do the following:

1. Open the top door on the passenger’s side top-box

storage unit. Use the ignition/door key to unlock it if
it is locked. See Top-Box Storage on page 2-86
for more information.

2. Remove the black pouch from the storage box.

You now have all of the tools you will need to
lower the spare tire and change a flat.

5-80

Summary of Contents for 2008 Escalade EXT

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Escalade EXT

Reviews:

Related manuals for 2008 Escalade EXT

Brands by name

Popular brands

Cadillac 2008 Escalade EXT, Owner'S Manual

Search results

Summary of Contents for 2008 Escalade EXT

Reviews:

Related manuals for 2008 Escalade EXT

Brands by name

Popular brands