Cadillac 2008 Escalade EXT Owner'S Manual Download Page 433

Page: 433 / 496

Vehicle Care/Appearance Materials

Description

Usage

Polishing Cloth

Interior and exterior
polishing cloth.

Tar and Road Oil
Remover

Removes tar, road oil,
and asphalt.

Chrome Cleaner
and Polish

Use on chrome or
stainless steel.

White Sidewall
Tire Cleaner

Removes soil and black
marks from whitewalls
and raised white lettering.

Vinyl Cleaner

Cleans vinyl.

Glass Cleaner

Removes dirt, grime,
smoke and fingerprints.

Chrome Wheel Cleaner

Removes dirt and grime
from chrome wheels.

Finish Enhancer

Removes dust,
fingerprints, and
surface contaminants.
Spray on and wipe off.

Description

Usage

Swirl Remover Polish

Removes swirl marks,
fine scratches, and
other light surface
contamination.

Cleaner Wax

Removes light scratches
and protects finish.

Foaming Tire Shine
Low Gloss

Cleans, shines,
and protects tires.
No wiping necessary.

Wash Wax Concentrate

Medium foaming
shampoo. Cleans
and lightly waxes.
Biodegradable and
phosphate free.

Spot Lifter

Quickly removes
spots and stains from
carpets, vinyl, and
cloth upholstery.

Odor Eliminator

Odorless spray odor
eliminator used on fabrics,
vinyl, leather and carpet.

5-105

Summary of Contents for 2008 Escalade EXT

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Escalade EXT

Reviews:

Related manuals for 2008 Escalade EXT

Brands by name

Popular brands

Cadillac 2008 Escalade EXT, Owner'S Manual

Search results

Summary of Contents for 2008 Escalade EXT

Reviews:

Related manuals for 2008 Escalade EXT

Brands by name

Popular brands