Cadillac 2007 XLR ROADSTER, Owner'S Manual

Page: 153 / 512

9
(Off): This position turns the system off.
R
(On): This position turns the system on.
S
(Resume/Increase): Push the switch to this
symbol to make the vehicle resume to a previously
set speed or to increase the set speed when
Adaptive Cruise Control is already active.
T
(Set/Decrease): Press this button to set the
speed or to decrease the set speed when
Adaptive Cruise Control is already active.
Engaging Adaptive Cruise Control With
the Set Button
{
CAUTION:
If you leave your Adaptive Cruise Control
switch on when you are not using cruise,
you might hit a button and go into cruise
when you do not want to. You could be
startled and even lose control. Keep the
Adaptive Cruise Control switch off until
you want to use cruise control.
{
CAUTION:
If you operate Adaptive Cruise Control
without your Head-up Display (HUD) on
and properly adjusted, your Adaptive
Cruise Control settings will not be visible.
You could forget your settings and be
startled by Adaptive Cruise Control
response and even lose control. Keep
your HUD on and properly adjusted when
using Adaptive Cruise Control.
The set speed is selected by the driver. This is the
speed you will travel if there is not a vehicle
detected in your path.
To set Adaptive Cruise Control, do the following:
1. Make sure the Head-Up Display (HUD) is
on and properly adjusted. See Head-Up
Display (HUD) on page 171 for more
information.
2. Move the switch to on.
153