19
ZEFIRO
3
- ZEN AIRTIGHT
Fig. 26 - Door adjustment
• Open the door.
• Loosen the two front screws in the upper hinge and, using the side screw (the one circled in the picture) adjust the door
forward or backward (see
Fig. 26
).
• Once the door is centred, lock the 2 front screws.
5.9
ELECTRIC CONNECTION
Warning: the appliance must be installed by an authorized technician!
• The electric connection occurs through a cable with plug put in an electric socket which is able to support charge and tension
specific of every model, as described in the technical datas table (see
FEATURES a pag. 37
).
• The plug must be easily accessible when the appliance is installed.
• Please further assure you that your network is endowed with an efficient earth connection: if it does not exist or if it is not
efficient, please endow you with one in compliance with the law.
• Connect the supply cable first on the back of the stove (see
Fig. 27
) and then at a wall electric socket.
Fig. 27 - Electric socket with master switch
• The master switch O/I (see
Fig. 27
) is to open only to switch the stove on, otherwise it is advisable to keep it off.
• Do not use extension cables.
• If the feeder cable is damaged, it must be replaced by an authorized technician.
• When the stove is not going to be used for a long period of time, it advisable to remove the plug from the socket on the wall.
5.10 CONNECTION TO THE EXTERNAL THERMOSTAT
The stove is already working by means of a thermostat probe positioned inside it.
We strongly recommend connecting the insert to an external thermostat, as the room probe may not work properly in the presen-
ce of high temperatures (given the close distance to the combustion chamber).
This operation must be performed by an authorised technician.
Connect the wires from the external thermostat to the "Term opt" terminal on the stove board. Activate the external thermostat
