Cadel SOUND3 5 UP, Installer Manual

Page: 21 / 40

21
Stufe a pellet
Fig. 43 - Mounting the stand
6.13 REMOVAL/ASSEMBLY OF CURVED SIDE PANELS (CHROME - SOUND - ROUND - FLOYD)
To disassemble the side panels, proceed as follows:
• Unscrew the side screws (see
Fig. 44
).
• Open the side panel (see Fig. 45 ) and release the fastening teeth.
• To assemble, proceed in reverse order.
Fig. 44 - Unscrew the screws Fig. 45 - Release the side panels
6.14 INSTALLATION OF TEE FITTING (EXCLUDING SOUND
3
UP - CHROME AT - FLOYD MODELS)
For stoves with top exhaust, a tee fitting with inspection cap must be installed.
The tee fitting must be blocked with the supplied clamp (see ).
Fig. 46 - Tee fitting Fig. 47 - Tee fitting
6.15 INSTALLATION OF SHARP AIRTIGHT REAR EXHAUST
The SHARP stove can be installed also with the rear exhaust.
Install the supplied 20° elbow (see Fig. 48 )