background image

11

ATRIUM AT 5kW-ROXY-MADISON-SOLO-TABLA

Fig. 3 -  NAVEL STAND ALONE module 

Fig. 4 - App EASY CONNECT PLUS

The documentation for connecting the Wi-Fi and using the App are available online at the following addresses:

https://www.cadelsrl.com/donwload-wi-fi/

http://www.free-point.it/it/downloads/

https://www.pegasoheating.com/it/documenti/

USE

8.1 

INTRODUCTION

To have the best performance with the lowest consumption please follow the here descripted instructions. 

•  The lightning of the pellets occurs very easily if the installation is correct and if the chimney flue is efficient.  

• 

Switch on the stove at Power 5,

 for at least 2 hours, in order to enable the materials which make up the boiler and the 

fireplace to adjust the inner springing stress. After 2 hours, the smell of paint and smoke will disappear.

•  By using the stove the varnish inside the combustion chamber could be subjected to alterations. This occurrence can be attri-

buted to different reasons: an excessive stove overheating, the presence of chemical agents in bad quality pellets, bad chimney 

draught, etc. Therefore varnish endurance in the combustion chamber cannot be guarantee.

Oily plant waste and lacquers can cause smells and smoke during the first working hours: it is advisable to 

ventilate the room because they could be noxious to people and animals.

Summary of Contents for ROXY









































Reviews: