background image

ATRIUM AT 5kW-ROXY-MADISON-SOLO-TABLA

26

Fig. 30 - Display: AL 4

12.13  FAILED IGNITION ALARM

It occurs when the ignition phase fails.

The message 

Al 5 alar al 5 Failed ignition

 "

AL 5 ALAr no LiGHtin

" scrolls on the display and the stove goes into alarm status (see 

Fig. 31

).

Fig. 31 - Display: AL 5

12.14  NO PELLET ALARM

It occurs when in the working phase, the flue gas temperature drops below a specific fixed parameter. 

The message 

Al 6 alar No pellet

 "

AL 6 ALAr MAncAno PELLEt 

"  scrolls on the display and the stove goes into alarm status (see 

Fig. 32

).

Fig. 32 - Display: AL 6

12.15  THERMAL SAFETY OVERHEATING ALARM

Occurs when the general safety thermostat detects a temperature above the trigger threshold. The thermostat triggers and turns 

off the feed screw, indicating the alarm status (alarm LED on). 

The display will show the message 

Al 7 alar 7 Thermal safety

  "

AL 7 ALAr SAFEty tHErMAL

" (see 

Fig. 33

) and the stove will shut 

down.

Fig. 33 - Display: AL 7

12.16  NO NEGATIVE PRESSURE ALARM

It occurs when the external pressure switch component detects a pressure/negative pressure lower than the trigger threshold. The 

pressure switch triggers and turns off the feed screw, indicating the alarm status (alarm LED on). 

The display will show the message 

Al 8 alar al 8 No Negative Pressure

  "

AL 8 ALAr FAiLurE dEPrESS 

" (see 

Fig. 34

) and the stove 

will shut down.

Summary of Contents for ROXY









































Reviews: