Cadel RIVERIDRO 16 T2, Installer Manual

Page: 47 / 52

new RIVER IDRO T2 - TESIS Airtight T2 - MIRA T2 - MAYA idroT2
47
14 FEATURES
DESCRIPTION RIVER IDRO 16-T2 RIVER IDRO 23-23H2O-T2
WIDTH 53 cm 53 cm
DEPTH 52 cm 52 cm
HEIGHT 110 cm 110 cm
WEIGHT 136 kg 136 kg
Effective rated power (H
2
O) 12,9 kW (11.094 kcal/h) 18 kW (11.094 kcal/h)
Minimum effective power (H
2
O) 3,4 KW 2,3 KW
Maximum operating pressure 2 bar – 200 kPa 2 bar – 200 kPa
INTRODUCED THERMIC POWER (Min/Max) 5,1 - 17,1 kW 5,1 - 24,3 kW
NOMINAL THERMIC POWER (Min/Max) 4,9 - 16,1 kW 4,9 - 22,4 kW
EFICIENCY (Min/Max) 96,7 - 93,7 % 96,7 - 92 %
FUME TEMPERATURE (Min/Max) 55 - 116 °C 55 - 153 °C
FUME MAXIMUM LOADING CAPACITY (Min/Max) 4,5 - 9,8 g/s 4,5 - 12,1 g/s
CO EMISSIONS (13% O
2
) (Min/Max) 0,012 - 0,008 % 0,012 - 0,010 %
OGC EMISSIONS (13% O
2
) (Min/Max) 3 - 2 mg/Nm
3
3 - 2 mg/Nm
3
NO
X
EMISSIONS (13% O
2
) (Min/Max) 94 - 95 mg/Nm
3
94 - 99 mg/Nm
3
Medium CO CONTENTS at 13% O
2
(Min/Max) 150 - 100 mg/Nm
3
150 - 136 mg/Nm
3
Medium POWDER CONTENTS at 13% O
2
(Min/Max) 18 - 13 mg/Nm
3
18 - 14 mg/Nm
3
CHIMNEY DEPRESSION (Max) 12 Pa - 2 Pa*** 12 Pa - 2 Pa***
ON SHARED CHIMNEY FLUE NO NO
FUME OUTLET DIAMETER Ø80 mm Ø80 mm
COMBUSTIBLE Pellet Ø6-7 mm Pellet Ø6-7 mm
PELLETS HEATING VALUE 5 kWh/kg 5 kWh/kg
PELLETS HUMIDITY ≤ 10% ≤ 10%
HEATING VOLUME 18/20°C Coeff. 0,045 kW (Min/Max) 137 - 451 m
3
** 137 - 627 m
3
**
HOURLY CONSUMPTION (Min/Max) 1 - 3,6 kg/h* 1 - 5,1 kg/h*
HOPPER CAPACITY 22 kg 22 kg
RANGE (Min/Max) 22 - 6 h 22 - 4 h
SUPPLY 230 V - 50 Hz 230 V - 50 Hz
POWER INPUT (Max) 343 W 343 W
INGNITER RESISTANCE POWER INPUT 300 W 300 W
MINIMUM EXTERNAL AIR INLET (last effective area) 80 cm
2
80 cm
2
STOVE WITH SEALED CHAMBER YES YES
EXTERNAL AIR INLET FOR SEALED CHAMBER 60 mm 60 mm
DISTANCE FROM COMBUSTIBLE MATERIAL (back/side/bottom) 200 / 300 / 0 mm 200 / 300 / 0 mm
DISTANCE FROM COMBUSTIBLE MATERIAL (ceiling/front) - / 1000 mm - / 1000 mm
* Values that can vary depending on the type of pellet used
** Heatable volume depending on the power required per m
3
(respectively, 40-35-30 Kcal/h per m
3
)
*** Value recommended by the manufacturer (not binding) for optimal product performance
Tested according to EN 14785 in compliance with the European Construction Product regulation (EU 305/2011)