Cadel INDIGO, User Manual

Page: 28 / 44

INDIGO - VERA - ELANE - MADISON - TABLA - ROXY - ATRIUM - SOLO 5
22
nimum value. In these conditions, the display shows the message
Modulate
“ ModuLAt ”.
If the room temperature drops below the set temperature, the stove returns to “
Work
" uorK " mode at the previously set power.
9.9 SWITCHING OFF
Switch the stove off by simply pressing and holding down button P3. Pul-Finale " cLEAninG SPEEd " appears on the display.
After a certain time, the stove switches off, and Off " oFF " is displayed.
9.10 CONNECTION TO THE EXTERNAL THERMOSTAT
The stove works through a thermostat probe placed in its inner. If you desire, the stove can be connected to an external room
thermostat. This operation must be executed by an authorized technician.
10 FUEL
10.1 FUEL
• Use top-quality pellets because they have influence in the calorific value and in ash remains.
• Pellets features are: dimension Ø6-7mm (D06 Class), maximum lenght 40 mm, calorific value 5kWh/kg, humidity ≤ 10%, ash
remains ≤ 0,7%, they must be correctly pressed and not much mealy, without sizing agents, resins and other additives (class
A1 pellets according to ISO 17225-2 (type ENplus-A1) are recommended).
• Not adequate pellets cause a bad combustion, a frequent burning pot obstruction and exhaust conduits obstruction. Further it
decreases the calorific value, soils the glass and increases consumptions and ash and unburnt granules quantity.
Humid pellets cause a bad combustion and running, so please assure you that they are stored in dry places and
far at least one meter from the stove and/or any other source of heat.
• It is advisable to try different type of pellets available on the market and to choose that which gives the best performance.
• The use of bad quality pellets can damage the stove so that the warranty and manufacturer liability fall.
• Pellets of variable quality and size are available on the market: the smaller the pellet, the greater the fuel supply, resulting in
poor combustion
Depending on the type of pellets it could be necessary a parameters adjustment, please contact an Authorized
Assistance Service.