Cadel INDIGO, User Manual

Page: 21 / 44

15
INDIGO - VERA - ELANE - MADISON - TABLA - ROXY - ATRIUM - SOLO 5
LEVEL 1 LEVEL 2 LEVEL 3 VALUE
01 - Feed screw status info
02 - T minutes info
03 - Thermostat status info
04 - Flue gas status info
05 - Flue gas extraction rpm
status
info
M8 - Engineer settings
M8 SEt tEcHnic
01 - Password
01-KEy AccESS
set
M9 - Pellet type
M9 tyPE PELLEt
01 - Loading pellets
01-Pr 54 LoAd PELLEt
da -9 a +9
MA - Flue type
MA tyPE cHiMnEy
01 - Flue extractor
01-Pr 55 SMoKE cHiMnEy
da -9 a +9
MB - Exit
Mb EScAPE
01 - Exit
01-EScAPE
set
9.3.1 Menu M1 - CLOCK SETTING
Set the current time and date. The board has a lithium battery that assures the internal clock life of more than 3-5 years.
Press the P1 button for 2 seconds to access the general programming menus. Pressing P1 (decreases) or P2 (increases) selects item
M1, and
M1 SEt cLocK
will scroll "M1-SEt cLocK "(see
Fig. 4
).
Fig. 6 - Display: M1
9.3.2 Menu M2 - CHRONO SETTING
Submenu M2-1 Enable chrono
The menu shown on the
M2 chrono setting
" cHrono EnAbLE " display allows you to globally enable and disable all the chro-
nothermostat functions. Enable by pressing button P3 and then pressing P1 or P2 for the On or Off section. Confirm with the P3
button (see
Fig. 5
).