Page 9
509 Sharptown Road P.O. Box 345 Bridgeport, NJ 08014
Email: [email protected] Fax: 856-467-5511
Internet: http://caddycorp.com Phone: 856-467-4222
Electrical Connection Plate
Operating and Installation
1.
Turn all individual equipment controls to the OFF position before attempting to connect or disconnect any
cord and plug assembly. After the cord and plug assembly is connected, equipment may be turned ON.
2.
The connection plate consists of the following:
a.
Point-of-use circuit breaker
b.
Outlet
c.
Indicator Light
3.
To energize the outlet, turn the circuit breaker to the ON position.
NOTE
Upon initial start-up, the circuit breakers may occasionally require a “break in” procedure. Turn the circuit
breakers OFF and ON several times.
4.
The equipment is now ready for operation.
