31
BAKERLUX SHOP.Pro™ Touch
Alarms
The ovens show any alarm/warning messages relating to the oven or installed accessories on the screen.
The warning messages signal malfunctions that allow the appliance/accessories to continue operating, but with a restricted set of
functions.
The alarm messages (ALARM) identify issues that prevent any operation whatsoever of the appliances/ accessories, which therefore
must be put into STOP mode.
If the alarm messages refer to the connected accessories, the oven can still be used.
AF - OVEN ALARMS
Display
Description
Effect
Solution
AF01
Motor thermal alarm
The oven stops any operating cycle
and blocks any screen display
configuration
Contact Cadco Customer Service
AF02
Safety thermostat alarm
AF03
Oven cavity alarm
AF04
Hood (?) Communications failure
alarm
WF - OVEN WARNING
Display
Description
Effect
Solution
WF06
Warning: power board
temperature
The oven will continue to operate,
but humidity detection is disabled
WF28
Warning: control board
temperature
The oven continues to run
WF33
SD card error
The oven continues to run
WC - COOKER HOOD WARNING
Display
Description
Effect
Solution
WC01
Smoke detector 1 broken
Smoke hood solenoid valve does
not open when a smoke
temperature probe is missing
Contact Cadco Customer Service
WC02
Board temperature error
The hood continues to operate
WC05
Inlet fumes too hot
The hood continues to operate
WC07
Communication lost
Motor and smoke hood disengaged
Check the hood power cable; if the
problem persists, contact Cadco
Customer Service
AL - PROVER ALARM
Display
Description
Effect
Solution
AL01
Cavity probe alarm
The proofer stops any operating
cycle and blocks any screen
display configuration
Contact Cadco Customer Service
AL02
Communications failure alarm
WL - PROOFER WARNING
Display
Description
Effect
Solution
WL02
Board temperature error
The proofer continues to run