![background image](http://html1.mh-extra.com/html/cadco/unox-bakerlux-shop-pro-touch/unox-bakerlux-shop-pro-touch_operation-manual_3283759011.webp)
11
INSERT TRAY
STEP
PROG PICTURE
6
Tap the “
PROG PICTURE
” icon
7
Choose the photo to go with the recipe.
8
Press the "
SAVE
" key to save the recipe.
9
The recently saved program is automatically
stored in the last position, after the other
programs already in the memory
.
The screen shows the "
CROISSANT
" recipe has
been added and saved.
To use the saved cooking cycles, access the
"
PROGRAMS
" section
"Oven Programs
Menu" on page
13
You do not need to assign a name and photo
to the recipes that you want to save. In this
case, instead of the recipe name, the word
"
PROG
" and a number will appear. Again, the
program is automatically saved in the last
position, after the other programs already in
the memory
.
10
Press the "
START/STOP
" icon: cooking will start
with the set parameters.
COOKING IN PROGRESS
1
If the cooking cycle requires preheating, the
oven starts to heat the cavity to bring it to the
set temperature (in the example: 180°C). DO
NOT place the dishes in the oven during this
phase.
To skip preheating see section
"Skip a
preheating cycle in progress"
on
page
17.
2
At the end of preheating, the oven beeps and
the screen shown (INSERT TRAY) appears. You
should now put the food in the oven. When
the door is closed, step 1 automatically starts
according to the set parameters.
3
During the cooking cycle, the time remaining
until the cycle is complete is shown on the
screen (in the example: 12 minutes and 6
seconds), as well as the temperature (in the
example: 180°C).
To view or change the parameters of a
cooking cycle in progress (e.g. lower the
temperature or extend the time), see
section View/modify the parameters
of a cooking cycle or preheating in
progress on page
12
If you want to stop the cooking cycle in
progress, hold down the "
START/ STOP
"
button (approximately 4-5 seconds).
CROISSAN
SET
Set preheating temperature
PREHEATING
180°C
TEMPERATURE
120°C
Current oven cavity temperature
SET
SET
SET
PREHEATING
PREHEATING
EP 1
1//1
PREHEATING
180°C
PREHEATING
180°C
TEMPERATURE
120°C
1
TEMPERATURE
180°C
2
NSERT TRAY
END OF COOKING PROGRAM
1’:30”
CROISSANT
CROISSANT
PROG PICTURE
SAVE
6
SAVE
7
8
PROGRAMS
PAGE 1/25
CAKE
CROISSANT
CROISSANT
PROG 6/6
9
10
CROISSANT
CAKE
PROGRAMS
PAGE 1/25
F
Cooking complete
Current cooking cycle
(less than 1 min. remaining)
Current cooking cycle
(more than 1 min. remaining)
Cooking by Cooking
time continues