17
STEP
1
SETTING LEAVENING PARAMETERS
This parameter can be modified only when it is
highlighted in red; if it is not already highlighted,
tap the icon.
leavening
duration
in hours and minutes
(setting it to below 0 by pressing the
"
-
(minus)
" button, the
time is set to infinity
and the prover operates continuously).
temperature
in oven cavity
SETTING THE PREHEAT (OPTIONAL)
To set the preheating step: tap
the symbol
Set the desired temperature for preheating.
Tap the
symbol to return to the parameter
setting screen.
An acoustic signal (if active*) indicates the end of
preheating, i.e. the set temperature has been
reached.
It is always better to preheat the proofer in
order to compensate for the heat lost when
opening the door.
Skip a preheating cycle in progress
Tap the
"
MODIFY
"
icon
2
Tap the
"
SKIP PREHEATING
"
icon.
The screen shown appears
(INSERT TRAY)
.
When the door is closed, step 1 starts
automatically according to the set parameters.
The changes are temporary, i.e. they only apply
to the cycle in progress and do not change the
original recipe if saved
.
SETTING THE NEXT STEPS (WHERE
NECESSARY)
To set the following steps (if needed):
tap the symbol
; all steps available will be
displayed; only set the ones you need.
Repeat the operations explained in the previous
section to set all cooking parameters from step "2"
onwards.
C
D
2
3
1
3
E
1
2