16
7.7
7.8
Setting the Channel and the Radio ID
When the RF60X units are in the
Master or Slave mode, they need to
communicate in the same RF wireless
channel with each other.
To set the channel, press
. Then
press the
button until <CH>
(short form for channel) is
displayed. Use the or button to
select the RF channel. Press
to go back to the main screen. The
selected channel will be shown on the
LCD panel.
To protect your setup from
interferences by other Cactus
devices, assign all your RF60X to a
specif ic radio ID. Press
, then
press the
button until <RAD ID>
(short form for radio ID) is
displayed. Use the or button to
set the radio ID from 1 to 999. Set
the same radio ID in all Cactus
devices in your setup.
Navigating the Menu
There are a number of conf igurable
menu options on the RF60X.
