40
11.4
S1
(FIRST): Triggering on the f irst
pre-flash, or on the main flash if
there is no pre-flash.
S2
(MAIN): Ignoring pre-flashes and
triggering on the main flash.
1.
To turn on the optical trigger,
press
then press the
button until the text area shows
<OPT SL> (short form for optical
slave). Use the
or
button
to select S1 (FIRST) or S2 (MAIN)
in the selection area. Press
or
to conf irm.
2. The optical slave indicator
will show in the status bar of
the LCD display whenever any one
of the optical trigger modes has
been turned on.
3.
To turn off the optical trigger,
press the
button and then
the
buttons until the text
area shows <OPT SL>. Use the
or
button to choose <OFF>. Press
or
to conf irm.
Delay Timer
Every RF60X is equipped with a
delay timer that can be conf igured
in either Master or Slave mode. The
