6
3.2 MANUAL OPERATION
DANGER
Do NOT manually transfer under load.
Disconnect transfer switch from all power sourc-
es by approved means, such as the main circuit
breaker(s).
3.2.1 ATS MANUAL OPERATION
A manual HANDLE is shipped with the transfer
switch. Manual operation must be checked BEFORE
the transfer switch is operated electrically. To check
manual operation, proceed as follows (Figure 3.1):
1. Turn the generator’s AUTO/OFF/MANUAL switch
to OFF.
2. Turn OFF UTILITY SERVICE DISCONNECT cir-
cuit breaker.
3. Note position of transfer mechanism main con-
tacts by observing the moveable contact carrier
arm. This can be viewed through the long narrow
slot in the inside cover of the ATS. The top of the
moveable contact carrier arm is yellow to be eas-
ily identified.
Manual operation handle in the UP position -
•
LOAD terminals (T1, T2) are connected to UTIL-
ITY terminals (N1, N2).
Manual operation handle in the DOWN posi-
•
tion - LOAD terminals (T1, T2) are connected to
EMERGENCY terminals (E1, E2).
3.2.2 LSS MANUAL OPERATION
A manual HANDLE is shipped with the transfer
switch. Manual operation must be checked BEFORE
the LSS is operated electrically. To check manual
operation, proceed as follows (Figure 3.2):
1. Turn the generator’s AUTO/OFF/MANUAL switch
to OFF.
2. Turn OFF UTILITY SERVICE DISCONNECT cir-
cuit breaker.
3. Note position of non-essential LSS main contacts
by observing the moveable contact carrier arm.
This can be viewed through the long narrow slot
in the inside cover of the ATS. The top of the
moveable contact carrier arm is yellow to be eas-
ily identified.
Manual operation handle in the UP position -
•
non-essential loads OFF.
Manual operation handle in the DOWN position -
•
non-essential loads ON.
Do not use excessive force when operating the
transfer switch manually or damage could be
done to the manual handle.
Section 3 — Operation
RTSS Type Transfer Switch
Move handle UP for the
UTILITY (NORMAL) position.
Move handle DOWN for the
GENERATOR (STANDBY) position.
Attach handle to the moveable
contact carrier arm.
NOTE:
Return handle to storage position in enclosure when finished with manual transfer.
Figure 3.1 — Actuating ATS Transfer Switch
Summary of Contents for 8kW
