Cabletron Systems SmartSwitch Router, User'S Reference Manual

Page: 73 / 338

SmartSwitch Router User Reference Manual 73
Chapter 4: SmartTRUNK Configuration Guide
The following is the SmartTRUNK configuration for the SSR labeled ‘R1’ in the diagram:
The following is the SmartTRUNK configuration for the SSR labeled ‘S1’ in the diagram:
The following is the SmartTRUNK configuration for the SSR labeled ‘S2’ in the diagram:
smarttrunk create st.1 protocol no-protocol
smarttrunk create st.2 protocol huntgroup
smarttrunk create st.3 protocol huntgroup
smarttrunk add ports et.1(1-2) to st.1
smarttrunk add ports et.2(1-2) to st.2
smarttrunk add ports et.3(1-2) to st.3
interface create ip to-cisco address-netmask 10.1.1.2/24 port st.1
interface create ip to-s1 address-netmask 11.1.1.2/24 port st.2
interface create ip to-s2 address-netmask 12.1.1.2/24 port st.3
smarttrunk create st.2 protocol huntgroup
smarttrunk create st.4 protocol no-protocol
smarttrunk add ports et.1(1-2) to st.2
smarttrunk add ports et.2(1-2) to st.4
smarttrunk create st.3 protocol huntgroup
smarttrunk create st.5 protocol no-protocol
smarttrunk add ports et.1(1-2) to st.3
smarttrunk add ports et.2(1-2) to st.5