Cabletron Systems SmartSwitch Router, User'S Reference Manual

Page: 136 / 338

Chapter 10: BGP Configuration Guide
136 SmartSwitch Router User Reference Manual
Figure 8 illustrates a sample BGP peering session.
Figure 8. Sample BGP Peering Session
The CLI configuration for router SSR1 is as follows:
interface create ip et.1.1 address-netmask 10.0.0.1/16 port et.1.1
#
# Set the AS of the router
#
ip-router global set autonomous-system 1
#
# Set the router ID
#
ip-router global set router-id 10.0.0.1
#
# Create EBGP peer group pg1w2 for peering with AS 2
#
bgp create peer-group pg1w2 type external autonomous-system 2
#
# Add peer host 10.0.0.2 to group pg1w2
#
bgp add peer-host 10.0.0.2 group pg1w2
bgp start
Physical Link
Legend:
Peering Relationship
AS-2
SSR1
10.0.0.2/16
10.0.0.1/16
SSR2
AS-1
1.1
1.1