Cabletron Systems SmartSwitch 8-slot, User'S Reference Manual

Page: 47 / 150

Chapter 2: Bridging Configuration Guide
SSR User Reference Manual 2 - 11
Monitor Bridging
The SSR provides display of bridging statistics and configurations contained in the
SSR.
To display bridging information, enter the following commands in Enable mode.
Configuration Examples
Creating an IP or IPX VLAN
VLANs are used to associate physical ports on the SSR with connected hosts that may
be physically separated but need to participate in the same broadcast domain. To
associate ports to a VLAN, you must first create an IP or IPX VLAN and then assign
ports to the VLAN.
For example, servers connected to port gi.1.(1-2) on the SSR need to communicate
with clients connected to et.4.(1-8). You can associate all the ports containing the
clients and servers to an IP VLAN called ‘BLUE’.
Step 1: Create an IP VLAN named ‘BLUE’
ssr(config)# vlan create BLUE ip
Step 2: Assign ports to the ‘BLUE’ VLAN.
Show IP routing table.
ip show routes
Show all MAC addresses currently in
the l2 tables.
l2-tables show all-macs
Show l2 table information on a specific
port.
l2-tables show port-macs
Show information the master MAC
table.
l2-tables show mac-table-stats
Show information on a specific MAC
address.
l2-tables show mac
Show information on MACs registered.
l2-table show bridge-management
Show all VLANs.
vlan list