Cabletron Systems SmartSwitch 8-slot, User'S Reference Manual

Page: 146 / 150

Chapter 10: QoS Configuration Guide
10 - 4 SSR User Reference Manual
2. Specify the precedence for the fields within an IP flow.
Set an IP QoS Policy
To set a QoS policy on an IP traffic flow, enter the following command in Configure
mode:
Specify Precedence for an IP QoS Policy
To specify the precedence for an IP QoS policy, enter the following command in
Configure mode:
Configure IPX QoS Policies
To configure an IPX QoS policy, perform the following tasks:
1. Identify the Layer-3 or 4 flow and set the IPX QoS policy.
2. Specify the precedence for the fields within an IPX flow.
Set an IPX QoS Policy
To set a QoS policy on an IPX traffic flow, enter the following command in Configure
mode:
Set an IP QoS policy.
qos set ip <name> <priority>
<srcaddr/mask>|any <dstaddr/mask>|any
<srcport>|any <dstport>|any <tos>|any
<interface-list>|any <protocol>
Specify precedence for an IP QoS
policy.
qos precedence ip [sip <num>] [dip <num>]
[srcport
<num>] [destport <num>] [tos <num>]
[protocol <num>] [intf <num>]
Set an IPX QoS policy.
qos set ipx
<name> <priority> <srcnet>|any
<srcmask>|any <srcport>|any <dstnet>|any
<dstmask>|any <dstport>|any
<interface-list>|any