Cabletron Systems SmartSwitch 8-slot, User'S Reference Manual

Page: 126 / 150

Chapter 9: Security Configuration Guide
9 - 2 SSR User Reference Manual
Monitor TACACS
You can monitor TACACS configuration and statistics within the SSR.
To monitor TACACS, enter the following commands in Enable mode:
Configure Passwords
The SSR provides password authentication for accessing the User and Enable modes.
If TACACS is not enabled on the SSR, only local password authentication is
performed.
To configure SSR passwords, enter the following commands in Configure mode:
L2 Security Filters
Layer-2 security filters on the SSR allow you to configure ports to filter specific MAC
addresses. When defining a Layer-2 security filter, you specify to which ports you
want the filter to apply. You can specify the following security filters:
• Address filters
These filters block traffic based on the frame's source MAC address, destination
MAC address, or both source and destination MAC addresses in flow bridging
mode. Address filters are always configured and applied to the input port.
Determine TACACS action if no server
responds.
tacacs set last-resort password|succeed
Enable TACACS.
tacacs enable
Show TACACS server statistics.
tacacs show stats
Show all TACACS parameters.
tacacs show all
Set User mode password.
system set password login <string>
Set Enable mode password.
system set password enable
<string>