Cabletron Systems CSMIM-T1, Installation Manual

Page: 145 / 198

Commands
CSMIM-T1 Hardware Installation Guide 7-19
Table 7-2 illustrates the \Kn command
Table 7-2 The \K n Command
*Forces the modem to command state. To transmit a Break and enter connect
state, type: AT\BO <Enter>.
NOTE
In reliable link connect state, the sender's Break control setting
determines how the receiver handles the Break.
Local DTE sends
Break during reli-
able or normal
connection Local DTE sends
\B
n; local modem
in command
mode, during reli-
able or normal
connection
Local modem
sends Break
during direct
connection Remote
modem sends
Break during
normal connec-
tion
\K0
Enter command
state; no Break to
remote system* Empty data buff-
ers; send Break to
remote system Send Break to
remote system;
set modem to
command state Empty data buff-
ers; send Break
to serial port
\K1
Empty data buff-
ers; send Break to
remote system Same as \K0 Send Break to
remote system Same as \K0
\K2
Same as \K0* Immediately send
Break to remote
system Same as \K0 Immediately
send Break to
serial port
\K3
Immediately send
Break to remote
system Same as \K2 Same as \K1 Same as \K2
\K4
Same as \K0* Send Break to
remote system in
sequence with
any transmit data
being buffered Same as \K0 Send Break to
serial port in
sequence with
receive data
being buffered
\K5
Send Break to
remote system in
sequence with
transmit data Same as \K4 Same as \K1 Same as \K4