3-23
9C300-1 Environmental Module Operation
The Module Backplane Screen
Select <BACKPLANE> on the Module Specific Screen, Figure 3-24, to access the
Module Backplane Screen, Figure 3-27. The Module Backplane Screen displays
the current SmartSwitch 9000 backplane configuration for a selected module.
•
Line 1 identifies the selected module by chassis slot location.
•
Line 2 displays the module’s FNB connection (if applicable) and connection
status. Refer to the SmartSwitch 9000 Operation Guide for further
information about FNB configuration.
•
Line 3 displays the module’s INB connection (if applicable) and connection
status. Refer to the SmartSwitch 9000 Operation Guide for further
information about the INB.
Figure 3-27. The Module Backplane Screen
Select <EXIT> to return to the Module Specific Screen.
The Environmental Module Specific Screen
Select <EM> on the Module Selection Screen, Figure 3-23, to access the
Environmental Module Specific Screen, Figure 3-28.
•
Line 1 displays the Environmental Module’s current status (on-line or fault)
and the hardware revision.
•
Line 2 displays the Environmental Module’s firmware and boot prom revision.
•
Line 3 displays the Environmental Module serial number.
Figure 3-28. The Environmental Module Specific Screen
<EXIT>
MODULE xx
INB A B/W ALLOC xxx MBPS
FDDI 1 INS PRI FDDI 2 BYP
<ENV> <EXIT>
EM STATUS ON-LINE HW REV xxx
SN xxxxxxxxxxxx
FW REV x.xx.xx BOOT PROM REV x.xx.xx
