3-19
9C300-1 Environmental Module Operation
The Diagnostic Results Screen
The Diagnostic Results Screen, Figure 3-21, displays the results of failed tests for
the modules selected on the Diagnostic Screen.
•
Line 1 displays the module(s) selected for diagnostics.
•
Lines 2 and 3 display failed test results, or, if no failures occurred, the message
ALL DIAGNOSTICS TESTS HAVE PASSED.
Figure 3-21. The Diagnostic Results Screen
Select <MORE> to view more failed tests for the current module.
Select <EXIT> to return to the Diagnostic Module Selection Screen.
The BBU Screen
Select <BBU> from the System Screen, Figure 3-15, to view the status of the
Battery Backup Units (BBUs). Figure 3-22 shows the BBU Screen.
•
Line 1 displays the screen heading.
•
Line 2 displays BBU status (CHARGING, STANDBY or DISCHARGING) if
BBUs are installed; however, if no BBUs are installed, the message NO BBU
INSTALLED displays.
•
Line 3 displays the estimated amount of system run time stored in the BBUs if
the system is running on a standard power source, or, if the system is running
on BBUs, the amount of system run time remaining in the BBUs at the current
power load.
Figure 3-22. The BBU Screen
Select <EXIT> to return to the System Screen.
Test Results (Left Blank if all pass)
<MORE> <EXIT>
MODULE xx
or ALL MODULE DIAGNOSTICS TESTS HAVE PASSED
BBU CHARGING
<EXIT>
BATTERY STATUS
SYSTEM RUN TIME AT PWR LOSS xxx MINUTES
