manualshive.com logo in svg

Cabletron Systems 9C300-1, User Manual

Share
Download
Cabletron Systems 9C300-1 User Manual Download Page 28

 

9C300-1 Environmental Module Operation

3-14

 

Figure 3-13. The Main Screen

 

The Alarm Screen

 

Select the

 

 <ALARMS>

 

 option field in line 3 of the Main Screen, Figure 3-13, to 

access the alarm message queue. Unread alarms are present in the message queue 
when the ALARM LED is red.

•

Line 1, Figure 3-14, displays the current alarm in the queue as well as the date 
and time the alarm occurred.

•

Lines 2 and 3 show the description of the current alarm including the module 
and parameter(s) causing the alarm.

If other alarms are in the queue (indicated by 

 

x

 

 > 1 on line 1), select 

 

<MORE>

 

 to 

see the information screens for them.

 

Figure 3-14. The Alarm Screen

 

Select 

 

<ACKNOWLEDGE>

 

 (after reading all alarms) to reset the front panel 

ALARM LED from red to green

 

. 

Selecting <ACKNOWLEDGE> deletes all 

alarms and resets the alarm pending banner on line 4 of the non-interactive 
screens.

Select <EXIT> to return to the Main Screen.

SMARTSWITCH 9000

<ALARMS>

<SYSTEM> <MODULES> <SCREEN CONTRAST>

CABLETRON SYSTEMS INC

Alarm Description Field

<MORE> <ACKNOWLEDGE> <EXIT>

Alarm Description Field

ALARM y of x 11/05/94, 11:23 

Summary of Contents for 9C300-1





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands