3-21
9C300-1 Environmental Module Operation
Figure 3-24. The Module Specific Screen
Select <EXIT> to return to the Module Selection Screen.
The Module Environment Screen
Select <ENV> at the Module Specific Screen, Figure 3-24, to display
environmental parameters for the specific module.
•
Line 1, Figure 3-25, identifies the selected module by chassis slot location.
•
Line 2 displays the measured input voltage from the 48 volt system power bus
to the module’s DC-to-DC converter. The SmartSwitch 9000 power supply
provides voltage to the module via a chassis backplane. The converter’s 5 volt
output line is also shown on line 2.
•
Line 3 displays the module’s current temperature in Fahrenheit and Celsius.
The temperature is qualified as either COLD, COOL, NORM (normal), WARM,
or HOT based on system parameters.
Figure 3-25. The Module Environment Screen
Select <EXIT> to return to the Module Specific Screen.
FW REV x.xx.xx SMB 1 FW REV x.xx.xx
<ENV> <MEMORY> <BACKPLANE> <EXIT>
MODULE xx STATUS ON-LINE HW REV xxx
BOOT PROM REV x.xx.xx SN xxxxxxxxxxxx
<EXIT>
MODULE xx
TEMP: xxx°F, xx°C NORM
INPUT PWR: xx.xV, OUTPUT PWR x.xV
