manualshive.com logo in svg

Cabletron Systems 9C300-1, User Manual

Share
Download
Cabletron Systems 9C300-1 User Manual Download Page 26

 

9C300-1 Environmental Module Operation

3-12

 

•

Line 3 displays the availability of power redundancy.

•

Line 4 displays the system status.

 

Figure 3-10. The Power Screen

 

The System Banner Screen 

 

The System Banner Screen, Figure 3-11, is the fifth screen of the non-interactive 
mode. The information that displays is the default information built into the 
system. 

•

Lines 1 and 2 display the Cabletron name and the system name.

•

Line 3 displays the system uptime.

•

Line 4 displays the system status.

 

Figure 3-11. The System Banner Screen

 

Interactive Mode

 

The LCD enters this mode upon installation. This mode allows user input 
through the five-function keypad to navigate through SmartSwitch 9000 status 
screens, and to make menu selections.

Press any button on the keypad to enter this mode from the non-interactive mode. 
Once past the Main screen, the Interactive Mode is maintained for three minutes 
without a keypad entry before returning to the non-interactive mode.

CHASSIS POWER

POWER LOAD_ _ _ _ _ _ _ _ _ _ 100%

POWER REDUNDANCY AVAILABLE

SYSTEM STATUS NORMAL

CABLETRON SYSTEMS INC.

SMARTSWITCH 9000

SYSTEM UPTIME hh:mm:ss

SYSTEM STATUS NORMAL

Summary of Contents for 9C300-1





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands