11
Final Assembly
10
Twist the water control knobs located
on the left and right hoods to the off
position. Twist the two side valves on the
side spray tubes to the off position. When the
black arrow on the side valves are pointed to
the left, they are in the off position.
11
The machine comes with a separate
GFCI Plug, plug machine's motor
into GFCI plug. GFCI safety plugs are highly
recommended to prevent electric shock.
Connect the motor power cord into an outlet.
Though the motor is sealed, you must make
sure to keep all electrical connections dry.
12
Attach the lamp power cord and water
pump to a surge-protected power
outlet. The pump has no on/off switch so
once you connect it to the power supply, it
will start working. ALWAYS UNPLUG WATER
PUMP FROM POWER SOURCE WHEN NOT
IN USE. Avoid touching the water pump in
the water bucket with the power on. NEVER
UNPLUG OR TOUCH THE POWER CORDS
WITH WET HANDS.
13
Adjust the two clear wheel splash
guards on the hoods so that the
wheels do not make contact with them. MAKE
SURE THE WHEELS ARE NOT IN CONTACT
WITH ANY PARTS BEFORE TURNING ON THE
MACHINE; THE WHEELS MUST SPIN FREELY.
You can now turn on the machine. The wheels
spin at 1800 rpm. It is typical for the motor to
produce a winding sound when starting up,
and a mild humming sound when turned off.
On some occasions, the motor may make a
high pitched sound. This is most likely caused
by the space between the unit and the table
surface. You can reduce the sound by putting
a cloth under the unit. WHEN TURNING THE
MACHINE OFF, THE WHEELS COAST TO A
STAND STILL.
14
Start the water drip by turning the
water control knobs to the on position.
Do not turn all of them on at once or you will
waste too much water. We suggest turning
one on at a time while you work on that
wheel. Our unique water system allows you to
drip water on each wheel individually. You can
adjust the water flow rate to your preference
with the water control knobs. While in use,
make sure there is enough water dripping so
that the wheels do not become dry. NEVER
RUN THE WHEELS DRY. For instructions on
how to use the side spray for the canvas pad
or diamond disc, turn to page 14.
15
You are now ready to start using the
CabKing-6V3. READ THE REST OF
THIS INSTRUCTION MANUAL, ESPECIALLY
THE SAFETY INSTRUCTIONS, BEFORE USE
TO AVOID RISK OF INJURY.
